Products
ARMAFLAKE ULTRA - A
®
A glass flake reinforced polyester coating for steel substrates exposed to C5-M or C5-I . It can withstands highly saline condition in sea water and extremely aggressive corrosion conditions up to about 80°C immersion temperatures. Traditionally developed for use on Oil Rigs and offshore platforms for protection of externals of riser pipes, cellar decks, pipe racks, railings, it is now widely used for the internals and externals of seawater out flow pipes, cooler covers, water boxes, protection against aggressive chemicals and acidic environments and other applications,Main advantages are ease of application, fast film build (up to 1mm in one coat), rapid cure times, (2-3 hrs thin film drying time) as well as repairable and overcoatable when cured.
Technical Data Sheet is available on request. Please contact
ARMAFLAKE ULTRA - B
®
It is formulated from a Novolac epoxy vinyl ester resin, and applied to give a dry film thickness of 1 mm it is used to protect steel from corrosive attack. It is widely used in the power generation,chemical and petrochemical industry for lining of tanks, process vessels, pipelines, ion exchange vessels. It provides excellent thermal and chemical resistance against solvents and acids. Armaflake Ultra – B, can withstand total immersion temperatures upto 100 deg C and in gaseous environments, temperatures up to 170 deg C.
Technical Data Sheet is available on request. Please contact
ARMAFLAKE ULTRA - C
®
This versatile coating acts as a very good corrosion barrier to range of acids, alkalis, hydrocarbons, some solvents and many other common reagents. It consists of a high performance epoxy resin filled with glass flakelets with a particle size distribution of 150-300 microns. The coating resists many common corrosive conditions up to 100°C (depending on chemical or corrosive type). It is very easy to spray (standard airless 68:1 machine) or brush apply. Uses vary from internal tank linings, to knock out drums, water boxes, spool pieces, pump and valve casings, pipe internals for outflow pipes and most process vessels.
Technical Data Sheet is available on request. Please contact
ARMATHERM
®
In the offshore world, not many products are approved for use in high temperature, high pressure applications. For example, in oil/seawater separator vessels, with gases carbon dioxide and methane at 30 bar pressure and 130°C (such as in the North Sea), many coatings suffer blistering from explosive decompression of the coatings. This occurs during shutdown cycles of clean out of these vessels. Armatherm can withstand this very disruptive and expensive failure mechanism. This is a two-pack solvent free highly potent epoxy resin reinforced with glass flakes. The glass transition temperature of this coating is very high at around 200°C. Other uses include subsea Christmas trees, pipe pieces or storage tanks containing hot media, such as slack wax on refineries. This coating would also find many applications on FPSO vessels and process equipment on power stations. It has very good overall corrosion resistance and is very tough and durable.